Subaru 2002 Impreza - Manual (Page 94)

IMPREZA(NA) A1830BE-A (ENGLISH)
2
Keys and doors
2-9
– CONTINUED –
HB1002BC
1) Positive (+) side facing up
4. Replace with a new battery (Type CR2032 or
equivalent) making sure to install the new battery
with the positive (+) side facing up.
5. Install the back half of the transmitter case.
6. Reinstall the two screws on the back of the trans-
mitter case.
After the battery is replaced, the transmitter must
be synchronized with the keyless entry system’s
control unit. Press either the “LOCK/ARM” or
“UNLOCK/DISARM” button six times to synchro-
nize the unit.
CAUTION
Do not let dust, oil or water get on or in the
transmitter when replacing the battery.
J Replacing lost transmitters
If you lose a transmitter or want to purchase addi-
tional transmitters (up to four can be programmed),
you should re-program all of your transmitters for
security reasons. It is recommended that you have
your dealer program all of your transmitters into your
system.
B Programming the transmitters
The keyless entry system is equipped with a special
code learning feature that allows you to program
new transmitter codes into the system or to delete
old ones. The system can learn up to four unique
transmitter codes. The four transmitter codes may
be the same or different.