Oldsmobile 2002 Silhouette - Manual (Page 337)

5-34
6. Make sure the tire is stored securely. Push, pull, and
then try to rotate or turn the tire. If the tire moves,
use the folding wrench to tighten the cable.
Put back all jacking tools as they were stored in the jack
storage compartment and put the compartment cover
back on.
To put the cover back on, line up the tabs on the right of
the cover with the slots in the cover opening. Push the
cover in place and push down the tab so that it rests in
the groove. This secures the cover in place.
A. Strap
B. Bag and Tools
C. Jack
Unless you have the plastic “bolt - on” wheel covers,
be sure to also store the center cap. When you replace
the compact spare with a full
- size tire, reinstall the
bolt - on wheel covers and the center cap. Tighten
them “hand - tight” over the wheel nuts, using the
folding wrench.