Oldsmobile 2002 Silhouette - Manual (Page 16)

1-10
To fold the seatback
forward, lift up on the
recliner lever located
on the front of the
seatback. The seatback
will lock into place.
To raise a seatback, lift the recliner lever while raising
the seatback until it locks upright. Push and pull on the
seatback to check that it is locked into place.
To recline the seatback, lift the recliner lever. Press back
on the seatback until you reach the desired position then
let go of the recliner lever.
To return the seatback to an upright position, lift
the recliner lever without putting any pressure on the
seatback. Push and pull on the seatback to be sure it is
locked into place.
Removing the Split Bench Seat
Make sure the seatback is in the upright position.
1. Lift the seatback recliner lever or pull the nylon strap
on the back of the seat to fold the seatback forward.
2. From behind the bench seat, pull the nylon strap at
the center of the base of the seat to release the rear
latches from the floor pins.
Do not let go of the strap until the seat is folded all
the way forward.