Oldsmobile 2002 Silhouette - Manual (Page 10)

1-4
Memory Seat (Option)
If your vehicle has this
feature, the controls are
located to the left of the
steering column and are
used to program and recall
the driver’s seat settings.
Adjust the driver’s seat to the position you would like
for driving. Then press and hold memory button 1 for
more than three seconds. A double beep will sound
when the memory is set.
To set the seat for a second driver, follow the previous
steps, but press button 2 instead.
To recall your memory positions, your vehicle must
be in PARK (P). Press and release the memory button
(1 or 2) corresponding to the desired driving position.
The seat will move to the position previously stored for
the identified driver. You will hear one beep.
You can also store an exit position for each driver. The
exit position is programmed by moving the seat to the
desired exit position and then holding the EXIT button
for more than three seconds. The exit position set will be
for the most recently selected driving position (1 or 2).
A double beep will sound when the memory is set. To
use EXIT, your vehicle must be in PARK (P). Press and
release the EXIT button and the seat will move to the
exit position stored for the most recently selected driver.
You will hear one beep.
To stop recall movement of the seat at any time,
press one of the three memory buttons or one of the
power seat controls located on the outboard side of the
driver’s seat.