Mercedes-Benz 2013 CLA Class - Manual (Page 221)

X Press the a button.
The current selection is displayed.
X To activate/deactivate: press the a
button again.
When ATTENTION ASSIST (
Y page 195) is
deactivated, the é symbol appears in
the multifunction display in the assistance
graphics display.
Activating/deactivating Blind Spot
Assist
X Press the = or ; button on the steer-
ing wheel to select the
Assist menu.
X Press 9 or : to select Blind Spot
Asst. .
X Press the a button.
The current selection is displayed.
X To activate/deactivate: press the a
button again.
For further information about Blind Spot
Assist, see (
Y page 197).
When the Blind Spot Assist: Sensors
deactivated message is shown, the radar
sensors are deactivated.
X Switch on the radar sensor system
(
Y page 223).
Activating/deactivating Lane Keeping
Assist
X Press the = or ; button on the steer-
ing wheel to select the
Assist menu.
X Press 9 or : on the steering wheel
to select
Lane Keeping Assist .
X Press the a button.
The current selection is displayed.
X Press a to confirm.
X Press the : or 9 button to set Off ,
Standard or Adaptive .
X Press the a button to save the setting.
When Lane Keeping Assist (
Y page 199) is
activated, the multifunction display in the
assistance graphic shows the lane mark-
ings in green.
Service menu
In the Serv menu, you have the following
options:
R
Calling up display messages in message
memory (
Y page 226)
R
Restarting the tyre pressure loss warning
system (
Y page 321)
R
Calling up the service due date
(
Y page 286)
Settings menu
Introduction
In the Settings menu, you have the following
options:
R
change the instrument cluster settings
R
change the light settings
R
change the vehicle settings
R
change the auxiliary heating settings
(
Y page 223)
R
change the convenience settings
R
restore the factory settings
Menus and submenus
219
On-board computer and displays
Z