TOYOTA 2010 Prius - Manual (Page 202)

176
2-1. Driving procedures
■
Alarms
The following table describes circumstances and correction procedures
when only alarms sound.
Alarm Situation Correction procedure
Interior alarm
sounds once
The driver attempts to shift
out of the “P” position with-
out pressing the brake
pedal.
The transmission will
not move out of the “P”
position. Press the
brake pedal before
attempting to shift
again.
The “P” position switch is
pressed while the vehicle
is moving.
The transmission will
automatically be set to
the “N” position. Select
the appropriate posi-
tion.
The driver attempts to shift
to the “R” position while the
vehicle is in forward
motion.
The driver attempts to shift
to the “D” position while the
vehicle is in rearward
motion.
The driver attempts to
select the “B” position
while in a shift position
other than “D” and “P”.
The driver attempts to
select the “B” position
while in the “P” position. The transmission will
not move out of the “P”
position.