TOYOTA 2010 Prius - Manual (Page 188)

162
2-1. Driving procedures
Power (ignition) switch
Performing the following operations when carrying the electronic
key on your person starts the hybrid system or changes “POWER”
switch modes.
■
Starting the hybrid system
Check that the parking brake is set.
Sit in the driver’s seat and firmly depress the brake pedal.
The “POWER” switch indicator turns green.
Press the “POWER” switch.
The hybrid system can be
started from any mode.
After a few seconds, the
“READY” indicator comes on
with a beep sound.
The vehicle can move when
the “READY” indicator is on,
even if the engine is stopped.
STEP 1
STEP 2
ITO21P112
STEP 3