TOYOTA 2013 Prius PHV - Manual (Page 81)

19
OVERVIEW
ELECTRIC VEHICLE SYSTEM
FEATURES/OPERATIONS
SAFETY AND EMERGENCY FEATURES
Charging system safety functions
- The Hybrid System will not start while the charging cable is attached to the
vehicle, even if the POWER switch is operated.
- If the charging cable is connected while the READY indicator is illuminated, the
Hybrid System will stop automatically and driving will not be possible.
- When the charging cable is connected to the vehicle, the shift position cannot be
changed from P to another position.
- If the latch release button is pressed, charging will not begin even if the charging
cable is connected.
- Charging will stop if the latch release button is pressed and held for several
seconds during charging. When restarting charging, reinsert the charging
connector after pulling it out, and check that the charging indicator illuminates.
Plug-in Hybrid Applications is a service for plug-in hybrid vehicles that is added
to the Safety Connect and Entune products. It provides charge support, comfort
® ®
support and drive support via the vehicle’s navigation system and the owner’s
smartphone.
Both an active Safety Connect
® account and an active Entune ® account are
required for the services.
The following functions of the Plug-in Hybrid Applications can be used with the
navigation system:
Type A Download of nearby charging stations to the map screen.
Type B View list of nearby charging stations and corresponding charging station
information (such as voltage supported).
For details, please refer to http://www.toyota.com/entune.
Plug-in Hybrid Applications