TOYOTA 2013 Prius PHV - Manual (Page 642)

5
W
hen
troub
le
arises
577
5-2. Steps to take in an emergency
PRIUS PHV_OM_OM47787U_(U)
Inflate the tire until the specified
air pressure is reached.
The sealant will be injected and
the pressure will spike to 44 psi
(300 kPa, 3.1 kgf/cm
2
or bar) or
58 psi (400 kPa, 4.1 kgf/cm
2
or
bar), and then gradually
decrease.
The air pressure gauge will dis-
play the actual tire inflation
pressure about 1 minute (15
minutes at low temperature)
after the switch is turned on.
Inject to specified air pressure.
• Turn the compressor switch
off and then check the tire
inflation pressure. Being
careful not to over inflate,
check and repeat the inflation
procedure until the specified
tire inflation pressure is
reached.
STEP 13