Lenco XEMIO-760 BT User Manual

Page 9

disconnect or un-pair it, also can re-connect those devices if it’s in
operating range.

In device’s list, choose the device’s name and choose you desired

function “Disconnect” or “Connect / Unpair” as you want. However,
make sure that you have disconnected the linking device before connect
the new wanted device.

Reconnect a pair Bluetooth device;

Automatically connecting: every time when turn “On” the Bluetooth

transmission function, it will automatically reconnect to the last
connected device if the receiver device is still in reconnect mode.
However, some Bluetooth receiver device may need to turn it “Off and
On” again for reconnecting. If not;

Manual connecting: some Bluetooth receiver device may need to

reconnect manually; turn it power Off and On again for reconnecting. Or;

Choose “Device’s List” again by using / and buttons, then

choose the known device and choose “Connect” for reconnecting.

All Music

Choose “All Music” to enter into music list, you can direct select the

wanted music for play and transmitting by using

and

buttons

BT Now Playing

Choose “BT Now Playing” to return now playing interface.

In “BT Now Playing” interface, you can selects; Previous / Next song file,

Play / Pause the song and adjust the Volume Up/Down by using the

and

/ buttons.

To Recall the Bluetooth’s Submenu / Exit Bluetooth Function

Press button, to recall the Bluetooth’s submenu. Or,

Pressing button until a “Exit BT Transmission?” dialog appear for

confirm. Choose “Yes” to exit by using

and

buttons, the

Bluetooth function will turn Off and return to main menu screen. Choose
“No” to abort.

Bluetooth Function Limitation:
1.

When you turn the player into Bluetooth audio transmitting mode, the

player earphone output sound will turned to Off automatically;

OGG & ACE are not support for Bluetooth audio transmission function.

This manual is related to the following products:

Xemio-767BT