Lenco SB-210BT - Manual (Page 7)

GB-7
TUNING/SKIP/SEARCH buttons on the remote to set the minute accordingly,
press the CLOCK button on the remote again to confirm your setting.
During playback, press and hold the CLOCK button on the remote to check the
current time.
Note: The time only could be set at standby mode.
TIMER SETTING
1. At standby mode, press and hold the TIMER button on the remote. The hour
on the display will begin blinking on the screen with the flashing timer icon “T”.
2. Press the TUNING/SKIP/SEARCH buttons on the remote to adjust the hour.
3. Press the TIMER button to confirm. The minute on the display will begin
blinking.
4. Press the TUNING/SKIP/SEARCH buttons on the remote to adjust the
minute.
5. Press the TIMER button on the remote to confirm your setting.
6. After the set time is reached, the unit will power on to the radio automatically.
7. The timer function can be deactivated or activated by short pressing the
TIMER button on the remote.
USB & SD/MMC CARD PLAYBACK
1. Power on the unit, insert an USB or a SD/MMC card into the unit.
2. Press SOURCE button repeatedly to switch to USB or card mode. The
playback will start automatically.
3. Press the TUNING SKIP/SEARCH FORWARD button on the remote to skip
to the next track; press and hold to search through the track forward.
4. Press the TUNING SKIP/SEARCH BACKWARD button on the remote to skip
to the previous track; press and hold to search through the track backward.
5. Use the numeric buttons to enter the track number to select your desired
track for playback.
BLUETOOTH® OPERATING
This unit can receive stereo audio signal from a BLUETOOTH® stereo audio
source device.
1. Power on the unit, switch to BLUETOOTH® mode by pressing SOURCE
button repeatedly.
2. LED indicator rapid blinking while it is pairing.
3. Enable the Bluetooth® of the Bluetooth® audio source device.
4. Pair and connect to SB-210 BT (the unit) on the audio source device. If
prompted for passcode, enter “0000”.
5. Pairing successful (LED indicator blue), ready to stream music.
6. During playback, press PLAY/PAUSE button to cease or resume the
playback.