Lenco Playlink-6 - Manual (Page 5)

4 - EN
LENCO PLAYLINK 6 OPERATION MANUAL
To configurate your speaker in Stereo Mode (ST) or Left mode (L) or
Right mode (R). If you use two identical speaker you can affect one for
right channel and another one for Left Channel.
Press this key allows to select: Bluetooth/ Line-IN/ Wi-Fi modes.
For easy connection to your home network. Please insert a small
isolated tool (like a wood toothpick) and press the inside key to start
the connection process.
This key has a double function:
Short press: set the speaker in DIRECT MODE. In this mode you can
stream music directly without the need of a local wireless network.
Long press (more than 5 seconds): RESET: Return to factory setting
(delivery status).
Aux Line input (Analog, 3.5 mm Jack), with auto detection connection.
Ethernet LAN connection to connect your speaker to a cable LAN
instead of Wi-Fi network.
Connector to plug the AC cable delivered with your speaker.
Important: Only use the cable delivered with the speaker, never
another one!
Rear panel
5. Stereo
Switch
6. MODE key
7. Quick
Connect
8. DIR MODE
/RESET
9. AUX-IN
10. Ethernet
11. AC IN
5 6 7 8 9 10 11