Lenco Playlink-6 - Manual (Page 12)

11 EN -
LENCO PLAYLINK 6 OPERATION MANUAL
6.1: Rename your speaker:
a. Press the “Device name” on the top of the screen.
b. Delete the current name and input the new one, then press OK.
7.1 Direct mode : One-to-One (Access Point mode)
Press the DIR.MODE/RESET button at the rear of the speaker (one pulse).
The LED indicator is flashing a few times, after which it becomes permanent white:
the speaker becomes detectable as a WiFi access point.
Browse your LAN list on your mobile device and select “PLAYLINK6 xxxxxxxx-AJ”
network, then “CONNECT”.
Open your app and play directly.
To come back in router mode press the DIR.MODE button again (one pulse).
Note:
1. After you pressed the Direct mode key, you should wait a minimum of 30 seconds to let
to the speaker reconnect to the Router mode or direct mode.
ANDROID ANDROID IOS IOS ANDROID IOS