Lenco Playlink-6 - Manual (Page 4)

3 EN -
LENCO PLAYLINK 6 OPERATION MANUAL
3. Unit description and operation
Sound output
This indicator displays several colors versus the speaker mode or status:
Permanently red: Stand-by mode. In this mode the power consump-
tio is < 0.5W; no function is available and need one minute to make the
speaker operational when wake up it from this mode.
Note: keep pressed the power key during 5 seconds to go to
Stand-by mode.
Flashing red: Network sharing mode. This mode allow you to get
the minimal power consumption keeping your WiFi network function
activated. The power consumption in this mode is 3W.
Yellow: Flashing Yellow indicates the speaker is booting. Please wait
until the LED stop flashing yellow to get your speaker operational.
White: WiFi mode:
In WiFi mode, the indicator can take 4 different status below:
→
Flashing slow: Booting and Waiting connection
→ Flashing fast: Connecting
→ Permanently white: a. Connected to the home network;
b. Direct mode connection
Blue: Bluetooth mode (BT)
→
Flashing blue: Waiting for BT connection
→ Permanent blue: Connected
Green: Line-IN mode
Purple: Flashing purple indicates you adjust the maximum preset
volume
Press this key to Power-ON the box or go to Stand-By mode.
To preset the maximum volume following your allowance.
Front panel
1. Speakers
2. Multi-
Function
LED
indicator
3. Power Key
4. +/-
4
1
3
2