Lenco IR-3000 - Manual (Page 11)

Locating and playing media files using the radio and universal plug ‘n’ play (UPnP)
1. Once the UPnP server is configured to share media files with the Internet radio, you can play
the files by performing the following actions on the radio.
2. Keep pressing BACK to get to the top-level menu and then rotate the dial to select ‘Media
Player’.
3. Press SELECT and then rotate the dial to highlight ‘UPnP Severs’.
4. Press SELECT and the radio will scan for all available UPnP servers.
Note: This may take a few seconds for the radio to complete its scan and before the scan has
completed, the radio will display ‘[Empty]’. The radio will continue to display ‘[Empty] if no UPnP
servers are found.
5. After a successful scan, select your UPnP server by rotating the dial and press SELECT.
6. The radio will now list the media categories available from the UPnP server, e.g. ‘Music’,
‘Playlists’, etc. Rotate the dial to select which category you wish to browse, press SELECT
and rotate the dial to highlight a sub category and press SELECT again. For example, you
could select ‘Music’ and then ‘Album’.
7. Rotate the dial to highlight the media files you wish to play and press SELECT.
8. The radio will display ‘[Add to Queue]’, press SELECT and the radio will add the tracks to its
queue and begin playing them automatically.
Set up a Windows PC to allow the radio to access your audio files via a UPnP server
1. If your PC is running Microsoft Windows XP, you can use Windows Media Player 11 (WMP11)
to act as your UPnP media server. WMP11 can be downloaded and installed from the
Microsoft website.
2. Once installed, WMP11 will create a library from all the media files available from your PC. To
add new media files to the library, select ’File > Add to Library…> Advanced Options’, click
‘Add’ and choose the files you wish to add and click’ OK’.
3. You will now need to connect your Internet radio to WMP11 and configure it to allow the radio
to access your media library. In order to this , you will need to do the following:
a. Keep pressing BACK to get to the top-level menu and then rotate the dial to select
‘Media Player’.
b. Press SELECT and then rotate the dial to highlight ‘UPnP Servers’.
c. Press SELECT and the radio will scan for all available UPnP servers.
Note: This may take a few seconds for the radio to complete its scan. While the scan is being
performed, the radio will display ‘[Empty]’. The radio will continue to display ‘[Empty]’ if no UPnP
servers can be found.
d. After a successful scan. Select your UPnP server by rotating the dial and then press
SELECT.
4. Your PC will now prompt you that a device has attempted to connect to your UPnP server. In
order to allow the radio to have access to the media files, you will need to click the ‘Library’
tab on WMP11 and select ‘Media Sharing…’.
- 10 -