Naim Audio NAC-N 272 - Manual (Page 22)

20
4. Set Up
4.12 The System Automation Menu
With System Automation enabled
and the NAC-N preamplifier
Remote Out socket connected to
the Remote In socket of a Naim CD
player, the Naim App can provide
system-wide control.
The System Automation menu comprises two items. These
are described in the following paragraphs:
Selecting CD Player opens a menu
that makes CD transport control
available through the Naim App.
Select Enabled to enable CD control
and select Input Used to specify the
NAC-N preamplifier input that the CD player is connected
to.
Note: CD player transport control using the
NAC-N preamplifier handset via System Automation is not
possible. The Naim App must be used.
Selecting Advanced Setup opens a menu that provides
access to a range of advanced configuration parameters.
These parameters will not normally need adjustment.
Contact your retailer, distributor or Naim directly for more
information if required.
4.13 The Factory Settings Menu
The Factory Settings menu enables
system status information to be
displayed, handset commands to
be analysed, radio presets to be
deleted, system automation to be
reset and default settings to be restored. The options are
listed below:
Parameter Options
System Status:
Select to display
Handset IR Mon.: Select to display
Clear All Presets:
Yes / No
Reset Sys Auto: Yes / No
Reset All Settings: Warning displayed: Resetting to
factory defaults. You will lose ALL
user settings. Press front panel play to
continue.
Factory Settings 1/5
4 System Status
Handset IR Monitor
Clear All Presets
Reset Sys. Automation
System Automation 1/2
4 CD Player
Advanced Setup
CD Player 1/2
4 Enabled No
Input Used Analogue 1