Naim Audio NAC-N 272 - Manual (Page 14)

12
3.4 The Naim App
The Naim app comprises pages dedicated to each streaming
source and input, and pages dedicated to set up. The Naim
app is intuitive in use and its capabilities and principles
are best learned by using it to configure your NAC-N
preamplifier to suit your needs. To begin using the Naim app
follow the steps below:
• Download and install the Naim app on your iOS or
Android device.
• Ensure that the iOS or Android device is connected
to the same network as your NAC-N preamplifier and
open the Naim app.
• From the Rooms menu select the Naim streaming
product you wish to control with the Naim app. The
diagram below illustrates selection of a NAC-N 272
from the Naim app setup page.
Note: If there are multiple Naim streaming products
connected to your network they will be listed for selection
on the Naim app rooms screen. The correct unit can be
identified either by its product name or, in the case of
multiple identical products, by the first four characters of
each unit’s MAC address appended to its product name.
The individual MAC address is listed in the unit’s front
panel Setup menu under Network Settings.
Note: The Naim app Settings menu enables preamplifier
default names to be changed. Designating each one with a
name that reflects their location will help make multiroom
control more satisfying and intuitive.
3.4.1 Selecting Inputs from the Naim app
With the desired NAC-N preamplifier selected, the Naim
app Input icons will configure to reflect the inputs available.
Tap the Input icon (which will display the current or default
input) and then select the required input. The diagram
below illustrates the Naim app home page and Input icons.
Note: Only one instance of the Naim app can be
connected to a single NAC-N preamplifier at any time.
If a streaming source such as Spotify ® is selected
automatically by the presence of a stream, the Naim app
display will switch to the appropriate streaming source page
and offer the controls available to that stream type. If an
alternative source is selected, the stream playback will stop
and the NAC-N preamplifier will disconnect from the stream
source.
Naim app Rooms
Naim app home
3. Operation and Control
Rooms
Setup new mu-so
Rooms
Setup new mu-so