Naim Audio UnitiLite - Manual (Page 20)

18
6.1 Disc Loading
To open the CD drawer press the remote handset or front
panel
stop button with the CD input selected. Press stop
again to close the drawer. To both close the drawer and
play the CD, press the remote handset or front panel
play
button. To open the drawer while a CD is playing press stop
twice.
If Auto Play is specified in the CD setup menu (see Section
4.3.1) playback will begin to from track one immediately
after a CD is loaded.
Note: UnitiLite will automatically read the disc index when
the CD drawer is closed.
6.2 CD Transport Control
CD transport (play, stop, etc.)
can be controlled from either
the front panel transport buttons
-
play , prev , next stop - or from
the remote handset transport
keys (
).
Note: To engage or disengage pause using the front panel
controls press play.
6.3 CD Display and Track Selection
When a CD is loaded UnitiLite will
display its total playing time and
number of tracks.
If CD auto play is engaged
the CD will begin playing
immediately. During play the
display will show the track number and its elapsed time.
The stop icon at the top of the display will change to a
play icon.
In either play or stop mode CD tracks may be selected
either by using the front panel
prev and next buttons or the
handset prev and next keys. Tracks may also be selected
by entering the track numbers using the handset numeric/
text keys.
To repeat an entire CD (or programmed running order)
press the handset
repeat ( ) key. To shuffle (randomise)
track order press the handset shuffle ( ) key.
Pressing the front panel or
handset
ok/list key will switch the
display to list mode where the CD
tracks and their individual running
times are listed. Tracks can be
CD Player
6 UnitiLite CD Player
The UnitiLite incorporate a fully featured CD player based on custom Naim transport
control software and high performance digital and analogue electronics. Select the CD
input to begin using the CD player.
CD Play List
Program...
4
1 6:42
2 4:20
3 3:56
selected to play by scrolling up and down the list using
the handset
up ( 5 ) and down ( 6 ) keys and pressing the
ok/list key. Above the track list in the display is a Program
command. Select Program to alter the CD running order
and to suppress or repeat tracks.
6.4 CD Track Playlist Programming
Selecting Program from a CD
track list opens the Modify
Program menu. Selecting New -
All tracks creates a track playlist
containing all the tracks on the
currently loaded CD and opens
the
Program menu. Selecting
New - No tracks creates an empty playlist and opens the
Select to Add menu. Edit and Clear are only displayed
if there is an existing playlist. Edit opens the Edit Program
menu while Clear deletes the existing playlist.
Note: If the desired playlist contains the majority of the
tracks on the CD select “New - All tracks” and delete
the unwanted tracks. Alternatively, if the desired playlist
has just a couple of tracks from the CD select “New - No
tracks” and add the desired tracks.
Note: CD play will stop if the Modify Program menu is
selected while play is underway.
The Program menu displays a
list of track numbers in the left
hand column and their individual
running times in the right hand
column. The order of the track
numbers, top to bottom, reflects
the order in which they will play.
If the menu has opened as a
result of selecting
New - All
Tracks the columns will reflect the
track sequence of the currently
loaded CD. If it has opened as
a result of selecting
New - No
Tracks only Select to Add will be displayed.
To delete CD tracks after
selecting
New - All Tracks , use
the handset up ( 5 ) and down
( 6 ) keys to scroll to the first track
to be deleted (track 3 in the
Program menu illustration) and
press the ok/list key. The Edit
Program menu will open to confirm the deletion.
Modify Program 1/4
4 New - All Tracks
New - No Tracks
Edit
Clear
Program [56:22] 3/8
1 02:34
2 04:20
4
3 03:17
4 07:21
Program [00:00] 1/1
4 Select to Add
Edit Program 1/1
4 Delete Track 3
42 CD
44:47
12 Track CD
42 CD
01 01:32