4 unitilite setup, 1 the setup home menu, 2 the language menu – Naim Audio UnitiLite User Manual
Page 13: 3 the inputs menu, Unit ilite setup
11
handset
up
(
5
) and
down
(
6
) and
ok/list
keys to select
a language. Exit setup mode by pressing the handset
exit
key.
4.3 The Inputs Menu
The Inputs setup menu enables
a variety of parameters to be
specified for each UnitiLite
internal source and external
input. These parameters define
how control of UnitiLite inputs
behaves. The options available
for each are described in
the following sections. Three
parameters are common to all
inputs:
Enabled:
Switches the input on or
off and displays or hides any associated menus.
Name:
Enables user specified names to be attached to
inputs. Use the handset to enter text.
Input Trim
: Enables the relative level of each input to
be adjusted so that each is of an approximately equal
volume. Adjust using using handset
6
or
5
key.
4.3.1 CD Input
Parameter Options
Enabled:
Yes / No
Name:
User definable
Input Trim:
±10dB
Auto Play:
Yes / No. If
Yes
is specified play will start automatically
when a disc is loaded.
UnitiLite Setup
4 UnitiLite Setup
Once UnitiLite is installed with mains power, speakers, a radio aerial and any external
input connections made, it can be switched on and set up for use.
The degree to which you modify UnitiLite’s default settings will depend upon the uses to
which you put it and the extent to which you use its capabilities. It may be that you have
no need to modify the default settings at all, however we would encourage you to read
this section of the manual in order that you gain a full understanding of UnitiLite’s abilities.
The following paragraphs describe each UnitiLite setup menu in turn starting with the setup
home menu.
Enter UnitiLite setup mode by pressing the handset setup ( ) key. Navigate around the
setup menus using the handset arrow keys and make selections using the ok/list key. Exit
setup by pressing the exit key.
4.1 The Setup Home Menu
The UnitiLite setup home menu
provides access to nine setup
menus. The function of each
menu is as follows:
Language:
Enables the
UnitiLite user
interface language to be changed.
Inputs:
Enables various parameters for each
internal and external input to be
configured.
Speakers:
Configures UnitiLite speaker output
options.
Headphones:
Configures UnitiLite headphone output
options.
Network:
Configures UnitiLite network connection
settings.
Front Display:
Configures UnitiLite display features.
Clock & Alarm:
Configures the clock and alarm.
Handset Keys:
Enables UnitiLite inputs to be assigned to
specific handset keys. Also enables
configuration of the handset navigation
(
3456
) keys.
Factory Settings:
Enables interrogation of UnitiLite status,
deletion of all user presets and return to
factory default settings.
Each of the nine setup menus is described in detail in the
following sections. Use the handset
up
(
5
) and
down
(
6
)
and
ok/list
keys to select a setup menu.
4.2 The Language Menu
The Language setup menu
enables the UnitiLite user
interface language to be
changed. Enter setup mode
and use the handset
ok/list
key
to select
Language
. Use the
Uniti Setup
1/9
4
Language
Inputs
Speakers
Headphones
Select Input
1/16
4
CD
FM
DAB
iRadio
CD 1/5
4
Enabled: Yes
Name:
CD
Input Trim:
0
Auto Select:
Yes
CD 4/4
Enabled: Yes
Name:
CD
Input Trim:
0
4
Auto Play:
Yes
Language 1/6
4
English
Français
Deutsch
Italiano