Nexen 5H30P-E 913005 - Manual (Page 12)

9 FORM NO. L-20203-F-1209
REFER TO FIGURES 11‑13.
27. Slide the Drive Flange (Item 22) into the Cylinder
(Item 2) and Ball Bearing (Item 11).
28. Install new Compression Springs (Item 8).
29. Coat the spline teeth of the Hub (Item 1) with
NEVER-SEEZ ® and slide the Hub (Item 1) into the
Drive Flange.
30. Reinstall the Retaining Ring (Item 14).
NOTE
The back of the Rotary Seal must be installed
facing the Drive Flange Assembly end of the
clutch.
31. Install the new Rotary Seal (Item 4) into the groove in
Cylinder.
NOTE
Use caution when sliding Drive Flange
Assembly onto Cylinder/Piston Assembly to
avoid damage to Rotary Seal.
PARTS REPLACEMENT (continued)
FIGURE 11
FIGURE 12
FIGURE 13
Drive Flange
Assembly
22
2
11
8
1
14
14
4
Cylinder/Piston
Assembly
Rotary Seal
(Item 4)
REPAIR KITS
Model
Repair Kit
Number
Model
Repair Kit
Number
5H30P-E 913008 5H50P-E 913048
5H35P-E 913018 5H60P-E 913058
5H40P-E 913028 5H80P-E 913117
5H45P-E 913038