Digimerge DGRT400 - Manual (Page 20)

USING THE CLIENT SOFTWARE
Digimerge Dialup Video Server User’s Guide 20
5.1.3 Image window description
Figure 6 shows all controls available from the image window.
Figure 6 Image window interface
Images from all cameras are updated in cyclic mode by default. You are also able to assign one
camera for faster update, by mouse clicking on the image window caption (single mode). Image
window frame will be highlighted in single mode. You may return to cyclic mode by mouse
clicking on the Image window caption, or in the main window area or by pressing Esc on the
keyboard.
Use Include in/exclude from update image cycle button to control renew image cycle in cyclic
mode. When this button is pressed, it becomes gray
. This image window will be excluded
from the renew image cycle.
You are able to adjust image quality settings as you like, using Image quality slider. Minimal
quality settings allow you to receive video at a frame rate up to 6 frames per second at 31200
bps modem connection from a single camera.
To change the image window size, you should use Change window size button, and resize the
image window by dragging the resize corner of the window. When you press Change window
size button, all image windows are rearranged in the main window to fit the screen using small
(170x120) or medium (340x240) video resolutions, without stretching. Thus, all size changes
that you have made by dragging the right bottom corner of the image window and main window
will be discarded. To avoid this, you should uncheck Enable image windows auto resize
Resize corner
Save image as JPG
Image quality
Loading time (sec)
Loading progress bar
Alarm indicator
Include in/exclude from
update image cycle Camera name
Save sequence as AVI
Change window size
Image Area
Image Brightness, Contrast, and Saturation settings