Digimerge DGRT400 - Manual (Page 17)

USING THE CLIENT SOFTWARE
Digimerge Dialup Video Server User’s Guide 17
5.1.2 Getting initial images from the DVS
Before you can get any images from the DVS unit, you need to establish a connection from your
PC. Press the (Connect to remote unit) button on the main control panel. This will
bring up the Establishing connection dialog as shown in Figure 4. Use the Phone number
field to enter the telephone number assigned to the line connected on the remote DVS unit you
are trying to access. If the DVS unit is located in another city or country, be sure to include the
long distance or international dialing codes as well as the outside line access code, if any. The
DVS program will simplify access if you “check” the Using Country and Area Codes box
below.
Figure 4 Dialing up a remote unit