Status > local network, Status > wireless, Status > local network status > wireless – Linksys WRT54GS User Manual
Page 24: Advanced configuration, Local network, Wireless
Chapter3
Advanced Configuration
20
Wreless-G Broadband Router wth SpeedBooster
Status > Local Network
The Status > Local Network screen displays the status of
your network.
Status > Local Network
Local Network
MAC Address
This is the Router’s MAC Address, as seen
on your local, Ethernet network.
IP Address
This shows the Router’s IP Address, as it
appears on your local, Ethernet network.
Subnet Mask
This shows the current subnet mask being
configured for your local network.
DHCP Server
If you are using the Router as a DHCP server,
that will be displayed here.
Start IP Address
For the range of IP Addresses used by
devices on your local, Ethernet network, the beginning of
that range is shown here.
End IP Address
For the range of IP Addresses used by
devices on your local, Ethernet network, the end of that
range is shown here.
DHCP Clents Table
Clicking this button will open a
screen to show you which PCs are utilizing the Router as a
DHCP server. You can delete PCs from that list, and sever
their connections, by checking a Delete box and clicking
the Delete button.
DHCP Clients Table
Click the Refresh button to update the on-screen
information.
Status > Wireless
The Status > Wireless screen displays the status of your
wireless network.
Status > Wireless
Wireless
MAC Address
This is the Router’s MAC Address, as seen
on your local, wireless network.
Mode
As selected from the Wireless > Basic Wireless
Settings screen, this displays the wireless mode (Mixed, G-
Only, or Disabled) used by the network.
SSID
As entered on the Wireless > Basic Wireless Settings
screen, this displays the wireless network name or SSID.
DHCP Server
The status of the DHCP server function is
displayed here.
Channel
As entered on the Wireless > Basic Wireless
Settings screen, this displays the channel on which your
wireless network is broadcasting.
Encrypton Functon
As selected on the Wireless >
Wireless Security screen, this displays the status of the
Router’s wireless security.
Click the Refresh button to update the on-screen
information.