Linksys WRT54GS - Manual (Page 15)

Chapter3
Advanced Configuration
Wreless-G Broadband Router wth SpeedBooster
WEP
WEP is a basic encryption method, which is not as secure
as WPA.
Security Mode > WEP
Default Transmt Key Select a Default Transmit Key
(choose which Key to use). The default is .
WEP Encrypton Select a level of WEP encryption, 64 bts
0 hex dgts or 28 bts 26 hex dgts. The default is
64 bts 0 hex dgts.
Passphrase Enter a Passphrase to automatically generate
WEP keys. Then click the Generate button.
Key -4 If you did not enter a Passphrase, enter the WEP
key(s) manually.
Click the Save Settngs button to apply your changes, or
click the Cancel Changes button to cancel your changes.
Wireless > Wireless MAC Filter
Wireless access can be filtered by using the MAC addresses of
the wireless devices transmitting within your network’s radius.
Wireless > Wireless MAC Filter
Wireless MAC Filter
Wreless MAC Flter To filter wireless users by MAC Address,
either permitting or blocking access, click Enable. If you do
not wish to filter users by MAC Address, keep the default
setting, Dsable.
Prevent Clicking this button will block wireless access by
MAC Address. This button is selected by default.
Permt Only Clicking this button will allow wireless
access by MAC Address.
Edt MAC Address Flter Lst Clicking this button will
open the MAC Address Filter List. On this screen, you can list
users, by MAC Address, to whom you wish to provide or block
access. For easy reference, click the Wreless Clent MAC Lst
button to display a list of network users by MAC Address.
MAC Address Filter List
Click the Save Settngs button to apply your changes, or
click the Cancel Changes button to cancel your changes.
Wireless > Advanced Wireless Settings
This Wireless > Advanced Wireless Settings screen is used
to set up the Router’s advanced wireless functions. These
settings should only be adjusted by an expert administrator
as incorrect settings can reduce wireless performance.