Dynex DX-NBKIT20 - Manual (Page 5)

Using the USB 2.0 4-port hub 5
Troubleshooting
If the hub experiences an excessive current, over-current protection disconnects
power from the port. The USB Hub Current Limit Exceeded dialog box opens.
To reset the hub:
• Click Reset.
Or, unplug the USB cable, then plug it back in.
Specifications
Ports ......................................................................... 1 upstream and 4 downstream
Compliance ......................................................................... FCC; CE emissions
Power.......................................... Bus power: 5V 500mA; Self power: 5V 2.5A
Storage temperature.....................................................-14-185°F (-10-85°C)
Working temperature ........................................................32-104°F (0-40°C)
P OWER ADAPTER
Your USB hub has a power jack for connecting to an AC adapter. If you want to pur-
chase an AC adapter it should have the following specifications:
Input: 100-240v 50 Hz-60 Hz; Output: 5V 2.5A
USB Hub
DX-NBKIT20-combo.fm Page 5 Friday, May 6, 2005 4:46 PM