Dynex DX-NBKIT20 - Manual (Page 3)

Using the USB 2.0 4-port hub 3
Features
• Compliant with Universal Serial Bus Specification Revision 2.0 (data rate
1.5/12/480 Mbps)
• Connects up to 127 USB devices (with multiple USB hubs)
• Bus power and self-power modes
• Plug-and-play
• 1 upstream and 4 downstream USB ports included
• Over-current detection and protection
• 1 red LED power indicator
System requirements
• Desktop or notebook computer with USB port
• One of the following operating systems (no driver needed):
• Windows® 98/SE or newer
• Mac™ OS X
Installing the USB hub
To install the hub:
1 Optional: Connect the power adapter (not included) to the power jack on
the hub. For more information, see “Power adapter” on page 5.
2 Plug the cable into the type A connector on the computer.
3 Optional: Plug the power adapter into an AC power outlet.
After you connect this hub to a computer, the computer detects the hub and
installs the required drivers.
DX-NBKIT20-combo.fm Page 3 Friday, May 6, 2005 4:46 PM