Specifications, About the ventilation holes, Removing the speaker net – Denon SC-CX303 User Manual
Page 7
4
ENGLISH
Specifications
Type:
2-way · 2-speakers
Reflex box, Low-leakage-flux
Speakers:
13 cm cone bass-mid x 1
2.5 cm soft dome high range x 1
Input impedance:
6 Ω/ohms
Max. input:
100 W (IEC)
200 W (PEAK)
Crossover frequency: 3 kHz
Frequency range:
35 Hz ~ 60 kHz
Sensitivity:
86 dB (1W · 1m)
Dimensions:
182 (W) x 296 (H) x 293 (D) mm
(Including protruding parts)
Mass:
8.7 kg
* For improvement purposes, specifications and design are subject to
change without notice.
About the Ventilation Holes
Two ventilation holes are provided in the tweeter dome and edge to
prevent warping of the diaphragm due to thermal expansion of the air
in the tweeter dome.
The holes are normal and do not indicate damage.
Ventilation holes
Tweeter dome
The net on the front of the speaker systems can be removed.
Removing the Speaker Net
To remove, grasp both sides of the net and pull forward.
To mount, line up the projecting pieces in the four corners of the
speaker net with the holes in the four corners of the cabinet and
press in.
ENGLISH