Notice, Read before installation is started), Engineering, inc – Vortech 1996-1998 Ford 4.6L Mustang Cobra User Manual

Page 2

NOTE

(Read before installation is started)

Included in this kit is a smaller than originally supplied supercharger pulley. This new pulley

is recommended to achieve the best performance results. Removal of the factory sealed pulley

will void the supercharger warranty unless the supercharger unit (with the original pulley still

attached) and new pulley are sent into Vortech for removal, installation and re-sealing. If

the supercharger warranty is not an issue, the pulley may simply be removed and replaced with

the new part supplied. Hammering/prying etc. on the supercharger and/or pulley will cause

damage to the parts. Light heating of the supercharger pulley with a propane torch (if the

pulley is tight on the shaft) will aid removal. A return authorization number is required before

the supercharger and pulley are sent into Vortech. Call the Vortech service department at

(805) 247-0226 for a return authorization number. Return freight (ground) will be paid by Vortech.

Vortech Engineering, Inc. • 1650 Pacific Avenue • Channel Islands, CA 93033-9901

Voice: (805) 247-0226 • Fax: (805) 247-0669 • M-F 8:00AM - 4:30PM (PST)

www.vortechsuperchargers.com

This product may not be legal for use on public roads in all 50 states.

NOTICE

This product is protected by state common law, copyright and/or patent.

All legal rights therein are reserved. The design, layout, dimensions,

geometry, and engineering features shown in this product are the

exclusive property of Vortech Engineering, Inc. This product may not

be copied or duplicated in whole or part, abstractly or fundamentally,

intentionally or fortuitously, nor shall any design, dimension, or other

information be incorporated into any product or apparatus without

prior written consent of Vortech Engineering, Inc.

ENGINEERING, INC.