Vortech 1996-2000 4.3L Truck/SUV - Manual (Page 11)

P/N: 4GD020-010
©2001 Vortech Engineering, LLC
All Rights Reserved. Intl. Copr. Secured
26APR01 V1.2 (4.3L V-6/S-10-(4GD))
6. SUPERCHARGER/ACCESSORY DRIVE BELT
A. Mount the supplied automatic belt tensioner onto the
main bracket. Rotate the unit so that the small alignment
pin falls into the corresponding hole in the bracket.
Secure the tensioner to the bracket using the suppplied
socket head bolt and 7/16" AN washer.
B. Route the supplied belt as shown (see Fig. 6-a). Belt
installation is easiest when the water pump is the last
pulley to be mounted (the radius on the edge of the
water pump pulley allows the edge of the belt to be slid
over it).
5
SUPERCHARGER
IDLER
SPRING
TENSIONER
ALT.
WATER
PUMP
CRANK
POWER
STEERING
AIR
CONDITIONER
Fig. 6-a