Vortech 2006-2010 6.1L Hemi Cars (Charger, Challenger, Magnum, 300C) - Manual (Page 23)

P/N: 4CL020-010 v6.0, 02/28/2012
©2012 Vortech Engineering, Inc
All Rights Reserved, Intl. Copr. Secured
9
6. AIR INLET INSTALLATION (300C and 2008 Magnum installations skip to
section 7. All others proceed as follows)
1. Locate assembly (4CL112-030) insure that all
parts are present.
2. Attach the rubber sleeve to the plastic duct with
the hose claps provided.
3. Attach the air filter to the inlet duct. (See Fig
6-a)
4. Attach the mounting bracket to the duct with
the fasteners provided. (See Fig 6-b)
5. Remove the 15 mm headed bolt at the bottom
of the core support. Set the bolt aside to be
reinstalled in a later step (See Fig 6-c)
Fig. 6-a
Fig. 6-b
Fig. 6-c
REMOVE
SCREW
TEMPORARILY