Dimplex Wall Switch Remote Control Kit WRCPF-KIT - Manual (Page 13)

13
! NOTE: Wire leads are not
polarized due to the nature of
this device.
9. Coil excess wiring to the back
of the device box and insert
the Controller and Outer
Housing into the device box
(Figure 16). Fasten with two
supplied flat head screws.
10. Attach your choice of Decora
style faceplate (not supplied)
to complete the installation
and to blend the installation in
with your choice of decor.
11. Initialize the sender with the
receiver installed in your
fireplace.
Wall Control Installation