VDO M4WL - Manual (Page 35)

35
M4 WL
Settings – total values – total ride time
The next digit on the left starts to flash and is ready
to be set.
Press the
BIKE or ALTI button to set the value of this digit.
Press the SET button to confirm your setting.
Once you have set all four digits, confirm the setting again
by pressing the
SET button.
The setting for the minutes is then opened.
Press the BIKE or ALTI button to set the minutes.
Once the minutes have been set, confirm the setting
by pressing the
SET button.
The response “Set OK” appears on the display.
If you want to configure further settings,
press the
BIKE or ALTI button to access these.
If you do not want to configure any further settings,
press and hold the SET or BIKE button.
The settings menu closes.
The VDO M4 WL returns to function mode.