D-Link DI-LB604 - Manual (Page 74)

74
DI-LB604 User’s Manual
D-Link Systems, Inc.
Frequently Asked Questions
Step 3: Create a new firewall rule:
Click Enabled. Enter a name (edonkey). Click Allow. Next to Source, select WAN under
interface. In the first box, enter an *. Leave the second box empty. Next to Destination,
select LAN under interface. Enter the IP Address of the computer you are running
eDonkey from. Leave the second box empty. Under Protocol, select *. In the port range
boxes, enter 4661 in the first box and then 4665 in the second box. Click Always or
set a schedule.
Step 4: Click Apply and then Continue.