D-Link DI-LB604 - Manual (Page 60)

60
DI-LB604 User’s Manual
D-Link Systems, Inc.
Frequently Asked Questions
How can I assign a Static IP Address in Windows 2000?
 Right-click on My Network Places and select Properties.
 Right-click on the Local Area Connection which represents your network card
and select Properties.
 Highlight Internet Protocol (TCP/IP) and click Properties.
 Click Use the following IP Address and enter an IP Address that is on the
same subnet as the LAN IP Address on your router. Example: If the router´s
LAN IP Address is 192.168.0.1, make your IP Address 192.168.0.X where X =
2-99. Make sure that the number you choose is not in use on the network.
 Set the Default Gateway to be the same as the LAN IP Address of your router
(192.168.0.1).
 Set the Primary DNS to be the same as the LAN IP address of your router
(192.168.0.1).