Denon AVR-3805 - Manual (Page 47)

47
5-6 Setting the On Screen Display (OSD)
• Use this to turn the on-screen display (messages other than the menu screens) on or off.
• Sets the on-screen display’s display mode.
Mode 1: Prevents flickering of the on-screen display when there is no video signal.
Mode 2: Flickering is not prevented.
Use this mode if the on-screen display does not appear in the mode 1, as may happen according to the TV being used.
1 Select “On Screen Display” at the Option Setup Menu.
CH SEL
ENTER
(Main unit) (Remote control unit)
CH SEL
ENTER
O n S c r e e n
* O p t i o n S e t u p
2 Display the On screen display setup screen.
CH SEL
ENTER
CH SEL
ENTER
(Main unit) (Remote control unit)
3 Select “ON” or “OFF”.
CH SEL
ENTER
(Main unit) (Remote control unit)
CH SEL
ENTER
O N / O F F : O N
* O n S c r e e n
M u t i n g L e v e l
* O p t i o n S e t u p
5-5 Setting the Muting Level
1 Select “Muting Level” at the Option Setup Menu .
3 Select the desired setting.
CH SEL
ENTER
(Main unit) (Remote control unit)
CH SEL
ENTER
CH SEL
ENTER
(Main unit) (Remote control unit)
CH SEL
ENTER
- - - d B
* M u t i n g L e v e l
CH SEL
ENTER
CH SEL
ENTER
(Main unit) (Remote control unit)
4
Enter the setting.
The Option Setup Menu reappears.
2 Display the Muting Level screen.
CH SEL
ENTER
CH SEL
ENTER
(Main unit) (Remote control unit)
• –20 dB: It is turned down the volume to –20 dB
from the present level.
• –40 dB: It is turned down the volume to –40 dB
from the present level.
• This sets the amount of attenuation at audio output muting.