Denon AVR-3805 - Manual (Page 38)

38
4 Enter the setting.
At the “2.Speaker Setup ”screen, select “Exit” and
press the ENTER button.
The System Setup Menu reappears.
Speaker type setting when using both surround speakers A and B
If “Small” is set for either surround speakers A or B, the output is the same as when “Small” is set for both A and B.
2-6 Selecting the Surround Speakers for the different surround modes
This Menu is displayed when both surround speakers A and B are used.
• At this screen preset the surround speakers to be used in each surround modes.
3 q To select the surround mode
When either “Large” or “Small” has been set for
both speakers A and B on the System Setup Menu
(when using both A and B surround speakers), the
surround speaker setting screen appears.
Select the surround speakers to be used in each
surround mode.
w To select the surround speaker
A : When surround speakers A is used.
B : When surround speakers B is used.
A+B : When both surround speakers A and B are
used.
CH SEL
ENTER
(Main unit) (Remote control unit)
CH SEL
ENTER
CH SEL
ENTER
(Main unit) (Remote control unit)
CH SEL
ENTER
C I N E M A : A
* S u r r S p S e t u p
Setting the Input Setup
1 At the System Setup Menu select “Input Setup”.
CH SEL
ENTER
(Main unit) (Remote control unit)
CH SEL
ENTER
I n p u t S e t u p
* S y s t e m S e t u p
CH SEL
ENTER
CH SEL
ENTER
(Main unit) (Remote control unit)
2 Display the Input Setup Menu screen.
CH SEL
ENTER
CH SEL
ENTER
(Main unit) (Remote control unit)
1 Select “Surround Sp Setup” at the Speaker Setup
Menu.
CH SEL
ENTER
(Main unit) (Remote control unit)
CH SEL
ENTER
S u r r S p S e t u p
* S p e a k e r S e t u p
2 Display the Surround Sp Setup screen.
CH SEL
ENTER
CH SEL
ENTER
(Main unit) (Remote control unit)
3