TracRac IM TracRac - Manual (Page 5)

TracRac INSTRUCTION MANUAL 5 TracRac Inc. 994 Jefferson Street, Fall River, MA 02721-4893 • 508-677-4130
BASE RAIL INSTALLATION
Trucks without bedliners
OVERVIEW:
TracRac installation is straightforward, and should take
about an hour. You’ll start by mounting the base rails to the
truck, ensuring that they remain parallel and in plane. Then
you’ll assemble the overhead racks, sliding them onto the
base rails.
1. Verify that you have received the correct parts, and that
the base rail part # corresponds to your pickup truck
make, model, and year.
2. Locate the correct hole pattern in the base rails for your
truck by referring to the enclosed base rail layout draw-
ing. The holes will line up with the stakepockets.
Note: Some beds taper, so the truck bed side walls “curve”
underneath the base rails – that’s OK!
Note: Labels at the end of each base rail identify the front
and side of the truck the rails must be placed on.
3. Use the plastic access plugs to cover the holes that do
not correspond to your truck.
Socket head cap screw
Plastic washer
Plastic cap
Base rail
Plastic shim
*(Optional)
See table below)
Rubber expansion block
Brass pocket nut
Truck Bed
*Truck models not requiring plastic shims
Mfg. # Description
21010 Ford Super Duty - Long Bed
21508 F-150 Super Crew
21510 Ford Super Duty - Short
21606 Nissan Titan Crew Cab
21607 Nissan Titan King Cab