SoundMax SM-CDM1052 - Manual (Page 19)

19
Icon flashing: AF switching mode on, but RDS information is not received yet.
When AF switching mode is selected, the radio checks the signal strength of AF all the time. The
interval of checking time of each AF depends on the signal strength of current station, from a few
minute for a strong station to a few seconds for a weak station. Every time that new AF is stronger
than the current station, it switches over to that frequency for a very short time, and new frequency
is displayed for 1-2 seconds. Because the mute time of AF switching or checking time is very short,
it is almost inaudible in case of normal program.
REGIONAL ON/OFF mode
Press and hold AF button, REGION ON/OFF mode is selected.
REG ON: AF switching or PI SEEK is implemented to the station which have all PI codes are same
as current station (PI CODE is checked when AF CHECK in progress)
REG OFF: The regional code in the format of PI code is ignored when AF switching or PI SEEK is
implemented. (PI CODE and COVERAGE AREA is not checked when AF CHECK in progress)
PTY (Program Type) function
Press PTY button repeatedly to select one of the following mode: PTY MUSIC group - PTY SPEECH
group - PTY OFF.
Selection of PTY program type in each group is made by repeatedly pressing preset buttons:
Button Music group Speech group
1 POP, ROCK NEWS, AFFAIRS, INFO
2 EASY, LIGHT SPORT, EDUCATE, DRAMA
3 CLASSIC, OTHERS CULTURE, SCIENCE, VARIED