SoundMax SM-CDM1052 - Manual (Page 12)

12
Setting the clock
To show the time:
-
In Radio mode when RDS data is received press CLOCK button to select the mode: CLOCK
=> FREQUENCY => PTY => PS NAME.
-
In Radio mode when RDS data is not received press CLOCK button to select the item: CLOCK
=> PTY NONE => FREQUENCY.
-
In Disc mode: Press CLOCK button shortly to display time for 5 seconds.
To adjust the time:
-
When time is displayed, press and hold for 2 seconds CLOCK button. Time will start blinking.
-
Rotate VOLUME knob clockwise to adjust minute.
-
Rotate VOLUME knob anticlockwise to adjust hour.
-
Press CLOCK button again to save setting.
Setting the sound characteristics
Press shortly and repeatedly SEL button to select the audio parameter: VOL => BASS => TREBLE
=> BALANCE => FADER. Rotate VOLUME knob to adjust the selected parameter.
Note: If turning off the power, all the settings of each mode will be saved. If you don’t rotate
VOLUME knob within 3 seconds after selecting the desired parameter, the unit will automatically
return to the current mode being displayed.
Setting other characteristics
Press and hold for 2 seconds SEL button to enter the setting mode.
Press repeatedly SEL button to select the setting: TA SEEK/TA ALARM, PI SOUND/PI MUTE,
RETUNE L/RETUNE S, MASK DPI/MASK ALL, BEEP 2ND/BEEP ALL/BEEP OFF, SEEK1/SEEK2 (in