SoundMax SM-CDM1052 - Manual (Page 18)

18
TA (Traffic Announcement) function
Press TA button briefly to select the TA mode on/off.
When TA mode is on (“TA” is displayed on the
LCD), it will begin to seek TA station and TA SEEK will be displayed on the LCD for a while. Traffic
announcement interrupts CD playback or radio listening when broadcasted. To interrupt traffic
announcement, press TA button short without switching off the TA mode. The set will return to the
previous operating mode.
EON TA LOCAL/DISTANCE mode
Press and hold TA button to select EON TA LOCAL/EON TA DISTANCE mode.
The purpose of this mode is to reduce unwanted interference caused by EON TA switching due to
weak signal strength, resulting in the radio being switched back to the current tuned station, or
being muted.
EON TA LOCAL: When the field strength level of EON linked stations is below the threshold level,
the radio will not switch to that station, avoiding unnecessary interference. When EONTA LOCAL
mode is selected, “EONTA LO” on numeric display is indicated for a few seconds.
EON TA DISTANCE: EON TA switching will be determined by the information of the current station.
When EONTA DISTANCE mode is selected, EONTA DX on numeric display is indicated for a few
seconds.
AF (Alternative Frequencies) function
Press AF button, AF mode is selected and the state of AF switching mode is displayed by AF icon in
display:
Icon off: AF switching mode off.
Icon on: AF switching mode on, and has RDS information.