Taser CAM - Manual (Page 13)

13
Configuration
5
Configuring the TASER CAM Recorder with EVIDENCE Sync Software
The EVIDENCE Sync software is used to set up your recorder.
1 Shift the X26 ECD’s safety switch to the down (SAFE) position.
2 Safely remove the TASER cartridge.
3 Connect the USB download cable (available separately) to the TASER CAM recorder.
4 Connect the USB download cable to your computer.
The LED status indicator on the TASER CAM recorder will flash green, then red.
If the TASER CAM recorder is installed in an X26 ECD, a “U” is displayed on the CID when the TASER CAM
recorder is plugged into a computer. While the recorder is plugged into the computer, the CID will display
the battery percentage, followed by a letter U, and then a blank screen.
5 Click Start and select All Programs.
5a Click TASER International and select SYNC.
5 If you have an EVIDENCE.com account, type your login information and click Submit.
If you do not have an EVIDENCE.com account, click Go Offline and then click OK. The program will restart
in the offline mode.
7 Click DEVICE SETTINGS.
You can turn your recorder’s microphone on or off. This option is included because some jurisdictions
restrict audio recordings.