Device management utility, User manual – SurgeX SX-AX20E User Manual
Page 32

User Manual
Firmware Version v2.04.281
© 2015 SurgeX/Electronic Systems Protection, Inc. | Technical Support: 800-645-9721 | surgex.com 32
tAuxCommand
typedef struct {
char relay;
//A or B eAuxStatus;
//N or F
}tAuxCommand;
tInformManualControl
typedef struct{
unsigned char outlet;
//id of outlet
to change unsigned char status;
//the state
to change to
}tInformManualControl;
tInformOverVoltage
typ
ed
ef
str
uct
{
flo
at
vol
tag
e;
}tInformOverVoltage;
tInformUnderVoltage
typ
ed
ef
str
uct
{
flo
at
vol
tag
e;
}tInformUnderVoltage;
typ
ed
ef
str
uct
{
flo
at
cur
re
nt;
}tInformOverCurrent;
tInformOverTemperature
type
def
stru
ct{
int
tem
pera
ture;
}tInformOverTemperature;
10. Device Management Utility
The Device Management Utility (DMU) is compatible with SurgeX Axess Elite / Axess Ready products and provides the
easiest means to find and configure your Axess Elite unit to:
Automatically discover multiple Axess Elite and Axess Ready units on a local network
Display the current IP address of each unit
Allows the settings of a new IP address for each connected device
Return a connected Axess Elite or Axess Ready device to Factory Defaults
The Device Management Utility is available for download at
Note: The IP address can only be set within the first 2 minutes after powering up the Axess Elite. The utility will only work
with an Axess Elite on the same local subnet as the PC.
Device: Discover: Automatically discover all Axess Elite products on the network. The DMU will display the location
name of the unit, the product ID and version number, the current IP address, and the MAC address. Factory
defaulted Axess Elites will display with the name Axess Elite and network settings will not be affected.
Add: Manually add an Axess Elite by IP address
Clear: Clear the list
Set:
IP Address: Changes the IP address of the selected Axess Elite
Factory Defaults: Return the selected Axess Elite to a Factory Default state. This action must be performed within
the first 2 minutes after powering up the unit
Local Address: Select the IP address to Discover on. This may be necessary for computers with multiple network
connections