StorCase Technology S10A100 - Manual (Page 17)

SAFTEmon User’s Guide - Rev. E00 StorCase Technology, Inc.
S10A100 17
Main Status Screen
NOTES: When remote monitoring via the internet, always hit "Refresh" on the browser
to make sure you are viewing the most up-to-date information.
Actual screen may vary depending on your InfoStation.
The Main Status Screen (Figure 6) displays the following "at-a-glance" InfoStation chassis
status information (according to SAF-TE Specification Rev. 1.0):
Power Supply Displays the status of each InfoStation power supply module.
Status
Blower Status Displays the status of each InfoStation blower.
Enclosure Displays the average temperature of the InfoStation enclosure.
Temperature
Timestamp Displays calendar date and time.
NOTES: Timestamp is located at the bottom of each SAFTEmon page.
SAFTEmon allows the user to synchronize the time of the InfoStation
chassis with the time of the host system. Simply double-click on the clock
located on the bottom toolbar (lower righthand corner) to set the day/time
properties. Once the desired setting is achieved, click on "OK" to synch-
ronize the time (the new time will not show until the next SAFTEmon poll).
Number Displays total count of SAFTEmon polls.
of Polls
NOTES: Polling interval is factory set at 15 seconds. Interval may be changed via
the SAFTEmon.exe window (Figure 5).
Total count of polls will reset back to "0" once SAFTEmon.exe is closed.