StorCase Technology S10A100 - Manual (Page 11)

SAFTEmon User’s Guide - Rev. E00 StorCase Technology, Inc.
S10A100 11
1
Carefully install the SAF-TE board onto the I/O repeater module by
mating the connectors together.
2
Once the connectors are mated, carefully push down on the SAF-TE
board so that it snaps onto the mounting peg.
3
Install the mounting peg (provided) onto the I/O repeater module.
SAF-TE
Processor
Board
I/O Repeater
Module
tt
IFS_71
I/O Repeater Module
(Side View)
SAF-TE
Processor
Board
Mounting Peg
1
3
2
Figure 3: Installing the SAF-TE Board onto the I/O Repeater Module
8. If the SAF-TE board was installed into an InfoStation without a RAID controller module,
simply reconnect I/O repeater module #1 to the host system.
If the SAF-TE board is installed into an InfoStation with a RAID controller module,
proceed to section "SAF-TE Board LUN Set-Up" for further installation information.
If the SAF-TE board is installed and used in conjunction with a non-StorCase RAID
Controller (such as a PCI-based controller), proceed to section “SAF-TE Board
Multiple LUN Set-Up” for further installation information.