StorCase Technology 12-Bay 4U Fibre/SATA JBOD - Manual (Page 32)

InfoStation 12-bay JBOD User's Guide - Rev. A00 StorCase Technology, Inc.
JBOD Controller Configuration 23
3 NVRAM
Saving Configurations
CAUTION: Any changes made in this menu will permanently erase data on disks! JBOD
controller should be offline before any configuration changes are made.
NOTES: The JBOD controller must be restarted for any configuration changes to take
effect.
NVRAM Menu
3.1 Update NVRAM
Select Yes or No (default). Select Yes to store latest configuration settings in NVRAM.
3.2 Erase NVRAM
Select Yes or No (default). Select Yes to clear contents of NVRAM and restore configuration
defaults.
3.3 Restart
Select Yes or No (default). Select Yes to restart the RAID controller.
3 NVRAM 3.1 Update
NVRAM
3.2 Erase
NVRAM
3.3 Restart
Yes / No
Yes / No
Yes / No