StorCase Technology DS322 - Manual (Page 16)

8 Installation
StorCase Technology, Inc. DS322 User's Guide - Rev. A02
INSTALLATION
CAUTION: The DS322 chassis contains NO USER SERVICEABLE parts inside the
unit. Refer ALL servicing to qualified personnel!
NOTE: Refer to the Data Silo DS322 User's Guide and Data Express DE110
User's Guide for additional operating and installation information. Also
refer to the disk manufacturer's documentation for specific information
regarding the disks.
Drive Preparation
1. Remove the drive from its protective packaging.
2. Plastic Drive Bezel: If the drive came equipped with a plastic front bezel, it
must be removed before installing the drive into the drive carrier.
3. In most cases, your drive will be factory-configured as a Master Drive using
a jumper option on the drive itself. StorCase however, recommends reconfiguring
the drive to Cable Select instead. This can be done by configuring the jumper
option on the drive itself (refer to the drive manufacturer's documentation for
further information).
NOTE: Since specifications (specifically, pin assignments) between drive manufac-
turers may vary, please refer to your drive manufacturer's documentation for
exact information regarding Cable Select configuration.