StorCase Technology S20A114 - Manual (Page 10)

Introduction 3
S20A114 User's Guide - Rev. A01 StorCase Technology, Inc.
Figure 2: DE75 Receiving Frame and Carrier
This User's Guide describes the steps required to install the DE75 removable enclosure inside
a computer peripheral bay or external expansion chassis. This guide supplements documen-
tation provided with the host computer system, operating system, and the drive to be installed
within the carrier.
General Description
The StorCase Technology Data Express ® DE75 (P/N S20A114) is composed of a receiving
frame which supports most 68-pin SCSI Ultra160 (LVD) interfaces and fits within a 5.25" half-
height peripheral slot. This 16-bit I/O can support up to 160MByte/sec transfer rates. The
receiving frame contains one (1) removable drive carrier designed to provide durable and
reliable mounting for one (1) 3.5" form factor, low-profile (up to 1" high), SCSI Wide, Wide Ultra,
Wide Ultra2 or Wide Ultra160 drive (Figure 2).
The S20A114 allows a drive to be removed and transported to another S20A114-equipped
computer or expansion chassis, and also provides the ability to secure sensitive data by
removing and storing the drive safely for future use.
NOTES: The S20A114 carrier supports most 68-pin SCSI Ultra160 interfaces, except Fujitsu
Alegro6 10K RPM drives (these drives have different spacing between the 68-pin
and DC power connectors and will not mate with the drive carrier board).
For SCSI Ultra160 operation, the DE75 requires Ultra160 chassis and cabling.
Carrier
Receiving Frame
Adapter Bracket
(Shown Installed)
0562a