Assembly – Dixon 966 004201 User Manual
Page 9
10
ASSEMBLY
CAUTION
Before raising deflector shield, turn mower
engine off. DO NOT remove deflector shield
from mower. Raise and hold shield when
attaching lower chute and allow it to rest on
chute while in operation.
Raise and hold deflector shield in upright position.
1.
Fit lower chute as shown and hook rear latch to
2.
mower deck.
Align the bracket slot on lower chute with the
3.
deflector bracket tab on the mower deck. Slide
chute down over tab.
With the lower chute in proper position, hold the
4.
chute securely while hooking the front latch to the
mower deck.
NOTE: While hooking the latches, the deflector
shield may try to push the chute away from the
mower deck opening. It is important to hold the
chute in position while hooking the latches to
the mower deck.
6
LOWER CHUTE INSTALLATION
Deflector
Shield
Deflector
Bracket Tab
Rear Latch
Front Latch
Attach bungee latch assembly from kit as
1.
illustrated.
7
UPPER CHUTE INSTALLATION
Slide upper chute onto lower chute, lining up
2.
notches and channels.
Stretch bungee latch up onto acorn nut on upper
3.
chute to secure.