Dixon 966 004201 - Manual (Page 6)

7
UNPACKING INSTRUCTIONS
• Remove all parts and packing materials from
carton.
Check carton contents against list. Be sure all
•
parts are there.
TOOLS REQUIRED
• ½" Wrench (2)
•
9 /
16
" Wrench
•
9 /
16
" Socket wrench
• Drill and 5 /
16
" bit
NOTE: When right hand (RH) and left hand (LH.) are mentioned in this manual, it means when seated
on the mower in the operator’s position.
CAUTION
BEFORE ASSEMBLING GRASS CATCHER TO MOWER:
Place motion control levers in “NEUTRAL” position. •
Set parking brake. •
Turn ignition key “OFF” and remove key. •
Make sure the blades and all moving parts have completely stopped. •
Disconnect spark plug and place wire where it cannot come in contact with plug. •
CONTAINER CONTENTS
3 - Soft bag containers 4 - Bolts 3 /
8
-16 x 3¾
1 - Upper chute 8 - Nuts 3 /
8
-16, Nyloc
1 - Lower chute 8 - Bolts 5 /
16
-18 x 1
1 - Catcher mount 4 - Bolts 3 /
8
-16 x 3½
1 - Cover Assembly
COVER ASSEMBLY
BAG CONTAINERS
UPPER CHUTE
DUMP BAG
INDICATOR
CHUTE LATCH
LOWER CHUTE
LOWER CHUTE
ATTACHING
STRAPS
PARTS IDENTIFICATION