StorCase Technology DE50 - Manual (Page 11)

4 Introduction
StorCase Technology, Inc. SATA 3Gbps DE50 User's Guide - Rev. B00
Figure 3: Front Panel
Front Panel
(Figure 3)
• Unit ID Number Indicator - This LED is for ID display purposes only. This BLUE
LED displays the status of the SATA 3Gbps DE50 device carrier if the carrier is
Installed and Locked in the receiving frame or if the carrier is removed from the
receiving frame. If the carrier is Installed but not Locked in the receiving frame, a
"u" will be displayed to indicate an unlocked condition. The unit ID number is selected
by means of the unit ID select switch inside the receiving frame using a special
alignment tool supplied with the DE50.
• Activity Indicator - A small BLUE dot next to the unit ID number illuminates to indicate
when the host computer is accessing the data on the DE50 carrier. This dot will flash
during communication with the host computer.
NOTE: Some drives may support this feature. Refer to your drive manufac-
turer's documentation for further information.
• Unit ID Select Switch - This rotating switch selects the unit ID number of the disk
drive. The Unit ID number is for ID display purposes only.
• Key Lock/Drive Power Switch - Performs three functions. The key switch as-
sures proper seating of the drive carrier within the receiving frame, turns power
to the drive carrier ON and OFF, and prevents unauthorized removal or installation
of the carrier. For the computer to access data on the disk drive, the key must be
turned counterclockwise to the locked position.
• Eject Button - Push to eject drive carrier from receiving frame.
• 5.25" Adapter Bracket - Some DE50 models do not include a 5.25" Adapter Bracket.
Eject
Button
Unit ID Select
Switch Location
* Some drives may support the Activity Indicator feature. Refer to
your drive manufacturer’s documentation for further information.
2
Key Lock/
Power Switch
Drive
Carrier
Unit ID Number
Indicator
Activity
Indicator *
5.25” Adapter
Bracket